HR-150A型 手动洛氏硬度计
HR-150A type manual Rockwell hardness
产品简介/ Product introduction:
HR-150A型手动洛氏硬度计外形美观,操作方便,是一种普及型的洛氏硬度试验机.机械手动测试,无电器装置,可进行黑色金属和有色金属的洛氏硬度测定,施加试验力的速度由缓冲器来调节,试验力的变换采用变荷手轮的旋转而获得,因而具有操作简便,性能稳定,使用广泛等特点。广泛适用于工厂车间和计量部门.
各项技术指标均符合:GB/T230-2002洛氏硬度计技术条件,参照ISO6508-2:1999国际标准。
Beautiful appearance, HC010-HR-150A manual Rockwell hardness tester is easy to operate, is a popular type Rockwell hardness testing machine. The mechanical and manual testing, no electronic device, capable of black metal and non-ferrous metal Rockwell hardness test, loading speed adjusted by buffer, test force transformation using variable charge handwheel the rotation was, therefore has the advantages of simple operation, stable performance, widely used characteristics. Widely used in factory workshop and Metrology Department.
All the technical indexes meet the technical conditions: GB/T230-2002 Rockwell hardness tester, according to ISO6508-2:1999 international standard.
适用范围/ Scope of application:
洛氏硬度计适用于黑色金属、有色金属和非金属材料的硬度测定。
适用范围:淬火、表面淬火钢,调质、退火钢,冷硬铸件,可锻铸件,硬质合金钢,铝合金,轴承钢,硬化薄钢板等。
Rockwell hardness meter is suitable for measuring the hardness of ferrous metal, nonferrous metal and nonmetal materials.
Scope of application: Hardened and surface hardened steel, quenching and tempering, annealing of steel, chilled casting, malleable cast iron, hard alloy steel, aluminum alloy, bearing steel, hardened steel sheet etc..
工作环境/ Work environment:
1、在室温10~35℃的范围内;
2、在稳固的基础上水平安装;
3、在无震动的环境中;
4、周围无腐蚀性介质;
5、室内相对湿度不大于65%;
1, in the range of room temperature 10~35℃;
2, in a stable foundation for horizontal installation;
3, in the absence of vibration environment;
4,Non corrosive medium, around;
5, the indoor relative humidity of not more than 65%;
工作原理/ Working principle:
洛氏硬度的试验原理:用金刚石圆锥体压头或一定直径的钢球压头,在初试验力F0和主试验力F1先后作用下,压入试样表面,保持一定时间,卸除主试验力,保留初试验力,此时的压入深度为h1,在初试验力作用下的压入深度为h0,它们之差e(h1—h0)来表示压痕深度的**增量。每压入0.002mm为一个洛氏硬度单位。(图1)
洛氏硬度的计算公式:HRA、C=100—(e/0.002)
HRB=130—(e/0.002)
The test principle of Rockwell hardness: Ball indenter or certain diameter diamond cone pressure head, in the initial test force F0 and the main test force under the action of F1 successively, pressed into the surface of the sample, keep a certain time, removable main test force, retain the initial test force, indentation depth of the H1, in the initial check depth of press force is H0, and the difference between them (e H1 H0) to represent the permanent incremental indentation depth. Each press 0.002mm as a Rockwell hardness unit. (Figure 1)
The calculation formula of Rockwell hardness:
HRA, C=100 (e/0.002)
HRB=130 (e/0.002)
技术指标/Technical Index:
1.洛氏标尺:HRA, HRB, HRC, HRD, HRE, HRF,HRG,HRH,HRK
2.初试验力(N):98.07(10kg)
3.总试验力(N):588(60kg),980(100kg),1471(150kg)
4.硬度值读数方式:表盘
5.试件允许**高度:170mm
6.压头中心到机身距离:165mm
7.洛氏硬度计外形尺寸(mm):520×240×700
8.洛氏硬度计重量(kg):70
9.执行标准:GB/T230.2国家标准、JJG112检定规程
10.硬度值范围
HRA:20~88
HRB:20~100
HRC:20~70
1 Rockwell scales: HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK
2 initial test force (N): 98.07 (10kg)
3 of the total test force (N): 588 (60kg), 980 (100kg), 1471 (150kg)
4 Reading: Dial hardness value
5 specimen allow maximum height: 170mm
6 the center of pressure head to body distance: 165mm
7 Size Rockwell hardness (mm): 520 x 240 x 700
8 The weight ofRockwell hardness (kg): 70
9 standards: GB/T230.2 verification regulation of national standard, JJG112
10 hardness value
HRA:20 ~ 88
HRB:20 ~ 100
HRC:20 ~ 70
仪器精度指标/ Instrument accuracy specifications:
1、硬度计示值允许误差(表1)
硬度标尺 |
标准块的硬度范围 |
示值**允许误差 |
允许示值重复性 |
HRA |
(20~75)HRA |
±2HRA |
0.8洛氏单位 |
(>75~88)HRA |
±1.5HRA |
||
HRB |
(20~45)HRB |
±4HRB |
1.2洛氏单位 |
(>45~80)HRB |
±3HRB |
||
(>80~100)HRB |
±2HRB |
||
HRC |
(20~70)HRC |
±1.5HRC |
0.8洛氏单位 |
HRD |
(40~70)HRD |
±2HRD |
0.8洛氏单位 |
(>70~77)HRD |
±1.5HRD |
||
HRE |
(70~90)HRE |
±2.5HRE |
1.2洛氏单位 |
(>90~100)HRE |
±2HRE |
||
HRF |
(60~90)HRF |
±3HRF |
1.2洛氏单位 |
(>90~100)HRF |
±2HRF |
||
HRG |
(30~50)HRG |
±6HRG |
1.2洛氏单位 |
(>50~75)HRG |
±4.5HRG |
||
(>75~94)HRG |
±3HRG |
||
HRH |
(80~100)HRH |
±2HRH |
1.2洛氏单位 |
HRK |
(40~60)HRK |
±4HRK |
1.2洛氏单位 |
(>60~80)HRK |
±3HRK |
||
(>80~100)HRK |
±2HRK |
2、洛氏硬度试验标尺、压头、试验力及应用范围(表2)
标尺 |
压头类型 |
初试验力(N) |
总试验力(N) |
应用范围 |
HRA |
金刚石压头 |
98.07 (10kg) |
588.4(60kg) |
硬质合金、碳化物表面淬火钢、硬化薄钢板 |
HRD |
980.7(100kg) |
薄钢板、表面淬火钢 |
||
HRC |
1471(150kg) |
淬火钢、调质钢、冷硬铸铁 |
||
HRF |
球压头 φ1.5875mm(1/16英寸) |
588.4(60kg) |
铸铁、铝、镁合金、轴承合金、退火铜合金、薄软钢板等 |
|
HRB |
980.7(100kg) |
软钢、铝合金、铜合金、可锻铸铁、退火钢 |
||
HRG |
1471(150kg) |
磷青铜、铍青铜和可锻铸铁 |
||
HRH |
球压头 φ3.175mm (1/8英寸) |
588.4(60kg) |
铝、锌、铅等 |
|
HRE |
980.7(100kg) |
轴承合金、锡、硬塑料等软材料 |
||
HRK |
1471(150kg) |
注:洛氏硬度测试常用标尺为A、B、C三种
标准配置/ Standard configuration:
1、主机 1台
2、金钢石圆锥体压头 . 1只
3、直径1.5875mm钢球压头 1只
4、大平试台 . 1只
5、中平试台 . 1只
6、“V”型试台 1只
7、标准洛氏硬度块:
HRB 1块
HRC 高低各1块
8、防尘塑料袋 1只
9、随机文件 1套
客户名录:
详见公司客户名录
、、、、、、
质量保证:
本公司保证交付的硬度计执行标准:金属洛氏硬度实验GB/T230-2002国家标准、JJG112-2003金属洛氏硬度计检定规程、JJG 152-1991金属表面洛氏硬度计检定规程,参照ISO6508-2:1999国际标准。精度达到合同要求。生产研发过程严格执行ISO9001:2000质量管理体系.
We guarantee delivery of performance standards hardness: Rockwell hardness test GB/T230-2002 metal national standards, JJG112-2003 metal Rockwell hardness test procedures, JJG 152-1991 metal surface Rockwell hardness test procedures, referring to ISO6508-2:1999 international standards. Accuracy requirements of the contract. Production and development process strictly implement ISO9001: 2000 quality management system.